Solvent Extraction Technology

We can provide turnkey plant for you:
Multiple oilseeds oil extraction plant with capacity ranging from 100 t/d to 10,000 t/d

The following explained extraction system, is used for all pre-pressed seeds cakes, also suitable for soybean flakes and high oil seeds as rapeseed, sunflower, cotton and others, but all sections can be easily introduced for various other seeds with minor changes.

The continuous solvent extraction is the most modern way of recovering oil from oil seeds, beans and other oil, grease containing products. In comparison with the rest of oil extraction processes, the continuous solvent extraction provides such advantages (economy in labor, higher oil yield, reduced maintenance) that it becomes a “must” for economically survival in the vegetable oil industry.
It is useful to insist on the importance of a correct preparation of the seed. A good preparation will give rise to satisfactory results in the extraction process and the obtained oil will be easier to refine.
The solvent used in the majority of oilseed solvent extraction plants around the world is as said before, commercial hexane, a mixture of hydrocarbons generally boiling in the temperature range of 65–69°C.

  • 2,000tpd Soybean and Rapeseed Extraction Project
  • Extraction Plant
  • Solvent Extractor
  • Extraction Plant under Installation

The solvent extraction process consists of five closely interrelated unit processes:
Oil extraction
Where the oil is extracted from flakes and/or collets in the extractor.
Meal desolventizing
Where solvent is evaporated from meal in the desolventizer / toaster (DT).
Meal drying and cooling
Where moisture is reduced from meal and meal is cooled in the dryer / cooler (DC).
Miscella distillation
Where the solvent is evaporated from oil and condensed in the distillation section.
Solvent recovery
Where the last solvent is recovered, for reuse, in the mineral oil system (MOS).

1. Solvent Extraction
Soybean flakes are conveyed to extractor, then extracted by miscella with different concentration gradient and fresh solvent. The miscella will be pumped to evaporation system and spent meal will be desolventized.
2. Evaporation System
Miscella will be pumped to evaporation system after removing impurities twice. The evaporation system consists of 1st stage evaporator, 2nd stage evaporator and stripping tower. The solvent evaporated from miscella will be recycled.
3. Solvent Recycling
The n-hexane evaporated from each section is recycled to solvent tank through the condenser. The uncondensed gas enters the exhaust condenser and most of the uncondensed n-hexane is condensed. A small amount of n-hexane vapor and non-condensable gas enter the absorption tower in which n-hexane is absorbed by mineral oil. Other non-condensable gas is exhausted through the exhaust fan.
4. D.T.D.C
Soybean meal after solvent extraction containing a certain amount of solvent will be conveyed to D.T.D.C for desolventizing, toasting, drying and cooling.
  • Solvent Extraction Process
  • 3D Design of Edible Oil Extraction

Oils Fats Project Cases By Myande
Product Catalog